Roof Repair and Renewal with Wet-Jet

Wet-Jet is a ready to use, easy to apply one-coater that meets and exceeds the highest standards of roofing products. 
You will save thousands of dollars on labor and material costs over expensive roof repair and replacement costs.

SEALS YOUR ROOF LEAKS INSTANTLY WHEN YOU NEED PROTECTION MOST!
Can even be applied on wet roofs while it is raining.

For commercial, industrial and institutional use, solve the most difficult problems with Wet-Jet.

For renewing sloped and dead level paper, gravel and metal roofs. 
For commercial, industrial and institutional use . . .
solve the most difficult roofing problems with WET-JET

WHAT GOES INTO PRODUCING A SUPERIOR ROOF COATING?

Modern chemistry has produced a new generation of synthetic and blended oils.
Oils that penetrate deeper, provide superior flexibility and last longer than ever before possible. 
It is an advance that has positioned  WET-JET far ahead into the future. 
WET-JET performs in all climates in over 60 countries throughout the World.

This new technology blended with the finest asphalts gives WET-JET its toughness . . .
the toughness to withstand sub-freezing temperatures and still retain amazing flexibility. 
It expands and contracts with the roof mat even through sudden temperature drops.

The fiberglass gives WET-JET the extra strength to bridge cracks and splits . . .
In hot weather it makes sure WET-JET won't sag or run on a metal roof - even at 400 F. 
Coated on smooth metal and inclined at an angle of 60°, it won't run or sag.

Our ADDITIVES - X-5 Oil - gives WET-JET the super penetration it needs to restore life to old sloped gravel and paper built-up roofs. 
Pinecel thrusts back the deadly oxidizing rays of the sun that break a roof down fast, forcing expensive, premature replacement.

These sophisticated blends give WET-JET super penetration.
Easy to apply with brush, roller or SEAMLESS SPRAY Equipment,
WET-JET goes down fast...the complete renewal takes just one coat  . . .makes renewing roofs a simple job, not a complicated expensive nightmare.

PACE's Total Roof Renewal System with WET-JET roof coating uses the existing roof as a base and will restore, seal, recondition and
waterproof old worn out roofs, saving unnecessary tear off and replacement expense - all in one easy, one coat process. 
With our WET-JET Roof Renewal System, over 90% of a building owner's money goes toward the materials which keep the roof watertight. 
Expensive contractor labor and overhead costs are bypassed. 
Thousands of dollars are saved on even the smaller roofs!

WET-JET has the unprecedented ability to expand and contract and withstand tremendous temperature changes. 
Because WET-JET will give and take with the movement of the roof, it will not peel, crack or become brittle even
under sub-freezing temperatures - unsurpassed for complete overall roof renewal and savings.

With WET-JET, the original Wet Surface Coating, emergency repairs can start immediately. 
WET-JET sticks to the wet roof, stops the leak and keeps it stopped.  There's no need to wait for the sun to shine. 
WET-JET keeps production going and the business running; there's no lost production of business due to a damaging roof leak. 
Then when the storm abates, the complete roof renewal can be accomplished.

 Available in 55 gallon and (205 liter) drums and 5 gallon and (20 liter) pails.

BACKED WITH PACE'S EXCLUSIVE 5-YEAR MAINTENANCE POLICY!

Providing state of the art industrial maintenance products to the world for 52 years

Sold for commercial use only
 

Wet-Jet
All-Weather Asphalt Roof Coating
[minimum shipment: 40 gallons]
5 gallon pail  - $145.90  ($29.18 per gallon)
55 gallon drum  - $1,587.85 ($28.87 per gallon)
For complete roof renewals and emergency patching.
Renews all types of old roofs, except wood shingles.
Applied with brush, roller or spray equipment.
Covers at rate of 1 1/2 gallons per 100 square feet on smooth metal.
2 gallons per 100 square feet on corrugated metal.
3 gallons per 100 square feet on sloped or flat paper, mineral roll/composition.
6 gallons per 100 square feet on sloped gravel.
8 Gallons per 100 square feet on dead level tar and gravel.

Before completing your Wet-Jet Order please see primers
Super Roof Cement and Fabron